ping的基本用法想必大家都會，可知不值到有關ping命令的高級用法呢？如下面的：

ping [-t] [-a] [-n count] [-l length] [-f] [-i ttl] [-v tos] [-r count] [-s count] [-j computer-list] │ [-k computer-list] [-w timeout] destination-list
Options:
-t Ping the specified host until stopped.To see statistics and continue - type Control-Break;To stop - type Control-C.
不停的ping地方主機，直到你按下Control-C。

此功能沒有什么特別的技巧，不過可以配合其他參數使用，將在下面提到。
-a Resolve addresses to hostnames.
解析計算機NetBios名。
示例：C:＼>ping -a 192.168.1.21
Pinging iceblood.yofor.com [192.168.1.21] with 32 bytes of data:
Reply from 192.168.1.21: bytes=32 time<10ms TTL=254
Reply from 192.168.1.21: bytes=32 time<10ms TTL=254
Reply from 192.168.1.21: bytes=32 time<10ms TTL=254
Reply from 192.168.1.21: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.21:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
從上面就可以知道IP為192.168.1.21的計算機NetBios名為iceblood.yofor.com。
-n count Number of echo requests to send.
發送count指定的Echo數據包數。
在默認情況下，一般都只發送四個數據包，通過這個命令可以自己定義發送的個數，對衡量網絡速度很有幫助，比如我想測試發送50個數據包的返回的平均時間為多少，最快時間為多少，最慢時間為多少就可以通過以下獲知：
C:＼>ping -n 50 202.103.96.68
Pinging 202.103.96.68 with 32 bytes of data:
Reply from 202.103.96.68: bytes=32 time=50ms TTL=241
Reply from 202.103.96.68: bytes=32 time=50ms TTL=241
Reply from 202.103.96.68: bytes=32 time=50ms TTL=241
Request timed out.
………………
Reply from 202.103.96.68: bytes=32 time=50ms TTL=24